Installation In Pressurized Systems; Residual Hazards; Rupture Of Connections; Heat Protection - Mettler Toledo InPro 8600 Série Instructions D'utilisation

InPro 8600 Series
InPro 8600 Serie
52 800 991

2.8.2 Installation in pressurized systems

Notice: The maximum permissible temperature and pressure specifications must not
be exceeded. The relative specifications are given on the type plate of the sensor.
2.9

Residual hazards

2.9.1 Rupture of connections

Sensor connections can become loosened through the effects of vibration.
Notice: All sensor interfaces including process adapter, and the interfaces between
optical window and sensor head, need to be checked periodically by the customer
and kept functional.
Danger! Leaky connections can allow process medium, cleaning solution or control
(compressed) air to escape to the environment, presenting a hazard for persons and
the environment.

2.9.2 Heat protection

Caution! The sensor is not equipped with heat protection. During steam-sterilization
procedures in pipes, the surface of the sensor can reach high temperatures and cause
burns.

2.9.3 External influences

Notice: Objects falling on the sensor can damage or destroy the unit, or cause
leaks etc. Lateral forces may damage or destroy the unit.

2.10 Emergency measures

Notice: Always observe and comply with local regulations!
© 05 / 08 Mettler-Toledo AG, CH-8902 Urdorf
Printed in Switzerland
13