Sensor Installation - Mettler Toledo InPro 86X0ie Manuel D'instruction

InPro 86X0 i e
Example label
MODEL:Turbidity Sensor InPro8630ie
型号：浊度传感器 InPro8630ie
P/N:
30541121
S/N:
1019902
(UKCA will be available from the beginning of 2022)
Cable connection to M800 Process 1-Channel transmitter
The RS-485 data cable (5-pin) is available from METTLER
TOLEDO in various lengths. Connect the data cable to the
M800 Process 1-Channel transmitter as described below.
M800 Process 1-Channel TB3
Terminal
1
2
3
4
5
6
7
8
9 – 16
In order to ensure optimum measurement results the follo-
wing points must be considered:
– Run the connection cable through the cable gland.
– Connect the wires to the sensor.
– Hand-tighten the cable gland.
4

Sensor Installation

The sensor is equipped with a Tuchenhagen-VARIVENT
process adapter, which is used to attach the sensor to the
process pipe in dimensions from DN 40 to DN 150. Prior to
the installation, the sealing surfaces (sensor and pipe adap-
ter) need to be cleaned and checked for damages. Further,
it needs to be verified that no obstacles are present within the
installation cavity of the sensor.
The installation of the sensor should be in a vertical stand-
pipe. If the sensor will be installed in a horizontal pipe, it
must be in a horizontal position and the process pipe has
to be filled completely with liquid during the measurement.
Installation on a vertical line (preferred)
© 06 / 2 021 METTLER TOLEDO Group, CH
PS:16 bar
TS:-10°C ~ 120°C
1155
Function
1-Wire
GND5V
RS485B
RS485A
GND5V
5V
24V
GND24V
Not used
METTLER TOLEDO
www.mt.com/pro
梅特勒-托利多仪器(上海)有限公司
地址：上海市桂平路589号
邮编：200233
Mettler-Toledo GmbH
Im Hackacker 15
8902 Urdorf,Switzerland
5-pin cable wire color
–
Yellow
Blue
White
Grey
–
Brown
Black
–
InPro 86X0 i e
30 421 373 B
en
19
Made in China by
METTLER-TOLEDO
®