Using Auto Setup - Yamaha YSP-800 Mode D'emploi

Masquer les pouces Voir aussi pour YSP-800:

Les langues disponibles

Example of using the supplied cardboard

microphone stand

Optimizer microphone position

More than 2 m

■ Assembling the supplied cardboard

microphone stand

You will find three separate parts (one circular-shaped part

and two longitudinal-shaped parts) of the cardboard

microphone stand originally put together.

Disassemble the three parts of the cardboard

microphone stand originally put together.

Insert one of the longitudinal-shaped part

into the crevice of the other longitudinal-

shaped part.

Place the circular-shaped part on top of the

two combined longitudinal-shaped parts.

Place the supplied optimizer microphone on

top of the circular-shaped part.

microphone stand

Using AUTO SETUP

Once the optimizer microphone is firmly connected to this

unit and properly placed in your listening room, follow the

procedure below to start the AUTO SETUP procedure.