Télécharger Imprimer la page

Input Menu - Yamaha YSP-800 Mode D'emploi

Masquer les pouces Voir aussi pour YSP-800:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 95
■ DD/DTS Dynamic Range
(Dynamic range of Dolby Digital and
DTS signals)
Use to select the amount of dynamic range compression to
be applied to the speakers. This setting is effective only
when the unit is decoding Dolby Digital and DTS signals.
Dynamic range is the difference between the smallest
sound that can be heard above the noise of the equipment
and the biggest sound that can be heard without distortion.
Choices: MIN (minimum), STD (standard),
MAX (maximum)
G)DD/DTS Dynamic Range
MIN STD )MAX
p
[ ]/[ ]:Select
[ENTER]:Retern
Select to adjust the speaker compression.
• Select MIN for listening to sources at low volume
levels.
• Select STD for general use.
• Select MAX for feature films.

INPUT MENU

Use to manually adjust various parameters related to the
audio and video input.
SET MENU → MANUAL SETUP → INPUT MENU
3 INPUT MENU
. A)INPUT ASSIGNMENT
B)INPUT MODE
C)INPUT TRIM
D)INPUT RENAME
[ ]/[ ]:Up/Down
[ENTER]:Enter
■ INPUT ASSIGNMENT (Input assignment)
Use to assign the optical and coaxial digital input jacks of
this unit to other components if the initial settings of this
unit do not correspond to your needs. By assigning other
components to the input jacks on this unit, you can display
the name of the connected component in the front panel
display and OSD, and operate the component with the
input selector button of the same name. If you connect a
component to the input jacks of this unit and do not assign
it, the default component name for that input jack is
displayed in the front panel and OSD when selected.
• Select OPTICAL IN (1) to assign components to the
TV OPTICAL IN jack of this unit.
Choices: TV, VCR
• Select OPTICAL IN (2) to assign components to the
AUX OPTICAL IN jack of this unit.
Choices: AUX, DVD
A)INPUT ASSIGNMENT 1/2
OPTICAL IN
(. (1);;;;;
(.
(1);;;;(
(.
(2);;;;; AUX
(.
(1);;;;( AUX
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
• Select COAX IN (3) to assign components to the
COAXIAL IN jack of this unit.
Choices: DVD, AUX
A)INPUT ASSIGNMENT 2/2
COAX IN
(. (3);;;;; DVD
(.
(1);;;;( DVD
(.
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
MANUAL SETUP
TV
TV
)
)
p
)
p
71

Publicité

loading