Care, Maintenance And Disposal - Beurer FT 90 Mode D'emploi

• Take the used batteries out of the battery compartment.
• Insert new batteries.
Make sure that the batteries are inserted observing the correct polarity.
• Close the battery compartment.

11. Care, Maintenance and Disposal

NOTICE:
• Do not subject the device to mechanical impacts.
• When not in use, store the thermometer in the provided storage case.
• Do not expose the device to liquids. The device is not waterproof. Avoid all direct
contact with water or other liquids.
• Do not expose the device to direct sunlight.
• Clean the measuring sensor before each use.
• Do not touch the measuring sensor with fingers.
• The measuring sensor is the most sensitive part of the thermometer. Take great
care of the measuring sensor when cleaning the device.
• Do not use any harsh cleaning products.
• Always observe all safety notes for user and device.
Safety notes w Page 3 – 6.
Clean the measuring sensor after each use. Use a clean cloth or cotton bud that can be
moistened with disinfectant or 70 % alcohol.
To clean the entire device, please use a soft cloth slightly moistened with a mild soapy
solution. Under no circumstances may liquid enter the device.
Do not use the device again until it is completely dry.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance to
local regulations. If you have any questions, please contact the local authorities responsible
for waste disposal.
19