Technical Specifications; Disposal - Beurer IL 50 Mode D'emploi

Procedure
1. Place the cool unit with the glass ceramic plate down
on a flat surface.
2. Using a suitable crosshead screwdriver, undo the
8 screws in the back panel.
3. Place the body so that the front ofthe glass ce-
ramic plate is lying on the flat surface.
4. Take the cool lamp by the left or right end and press
it carefully to the right or left.
5. Now lift it forwards and out of the socket.
Note
Use a cloth to hold the new lamp when inserting it,
not bare fingers, as the grease on your skin could
damage the coating on the lamp.
6. Insert the new lamp in the socket. The new lamp is
inserted in the reverse order to removal.
7. Close the unit again. The unit is closed in the reverse
order to opening it.
Make sure that no foreign objects are left in the
body of the unit and that nocables become trapped.
Storage
Remove the mains plug and let the unit cool down
completely before you move it.
If possible, store the infrared radiant heater in its origi-
nal packaging in a dry place.

7. Technical specifications

Mains
connection AC 220 V – 240 V / 50 – 60 Hz
Power
consumption 300 W
Timer Adjustable from 1 to 15 minutes
in one-minute steps.
Max. Radiation
intensity 490 W/m
Dimensions
(WxHxD) 270 x 285 x 195 mm
Weight Approx. 1.5 kg
Operating Temperature: 10 °C to 35 °C
conditions (50 °F to 95 °F)
Relative humidity: ≤ 90 %
Storage and Temperature: -10 °C to 50 °C
transport: (14 °F to 122 °F)
Relative humidity: ≤ 90 %
Protection class II
This device meets the requirements of the European
Medical Devices Directive 93/42/EEC with amend-
ments as well as the German Medical Devices Act.
The serial number is located on the device or in the
battery compartment.
We retain the right to make technical modifications to
improve and further develop the product. For manufac-
turing reasons, the colour of the glass may change dur-
ing operation but this does not affect the performance
or quality of the unit.

8. Disposal

For environmental reasons, do not dispose of the de-
vice in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collec-
tion or recycling point. Dispose of the device in
accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities respon-
sible for waste disposal.
This equipment complies with European standard
EN 60601-1-2 and is subject to specific safety provi-
sions for electromagnetic compatibility. Please note,
however, that portable and mobile HF communication
equipment may influence this unit. More details can be
requested from the stated Customer Service address
or found at the end of the instructions for use.
12
at 30 cm
2