Storage And Maintenance - Beurer FT 65 Mode D'emploi

Masquer les pouces Voir aussi pour FT 65:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Note:
• When changing the batteries, use batteries of the same type, make and capacity.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.
1. Loosen the screw on the battery compartment lid and pull the lid off
downwards.
2. Remove the used batteries and insert two new batteries in the direction
indicated.
3. Close the battery compartment lid and screw it back on.
Dispose of used batteries in accordance with the applicable legal regula-
tions. Never dispose of batteries in the normal household waste.

9. Storage and maintenance

• Clean the sensor tip after each use. Use a clean cloth or cotton bud that can be moistened with disinfectant, alcohol or
warm water.
• To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solution.
• Do not use any harsh cleaning products.
• Always store the thermometer with the forehead/cover cap on.
• If prolonged storage is intended, you should remove the battery.
• The device must not be stored or used at an excessively high or low temperature or humidity (see technical data), in sun-
light, in association with an electrical current or in dusty locations. Otherwise inaccuracies can occur.
29

Publicité

Table des Matières
loading

Table des Matières