Setup Menu List - Sony PXW-X180 Mode D'emploi

Setup Menu List

The functions and available settings of menus added newly are listed below.
The default settings set at the factory are shown in bold (example: Off).
Recording
Menu items Sub items and setting values
Picture Cache
Setting
On / Off
Rec
Settings for the
Cache Rec Time
picture cache
XAVC-I / XAVC-L
recording function
0-2sec / 2-4sec / 4-6sec /
6-8sec
MPEG HD422 / MPEG HD420 /
DVCAM
0-2sec / 2-4sec / 4-6sec /
6-8sec / 8-10sec /10-12sec /
12-14sec / 13-15sec
Paint
Menu items Sub items and setting values
White
Filter White Memory
On / Off
Settings for white
balance
System
Menu items Sub items and setting values
Network
NFC
Execute / Cancel
(PXW-X180 only)
Settings for the
network
connection and
respective display
Setting
items
Wi-Fi Access Point / Wi-Fi
Station / Modem / Off
Channel
Auto / CH1 / CH2 / CH3 / CH4 /
CH5 / CH6 / CH7 / CH8 / CH9 /
CH10 / CH11 / CH12 / CH13
SSID & Password
WPS
Execute / Cancel
Device Name
IP Address
Subnet Mask
MAC Address
Contents
Turn the picture cache recording function on/off.
Sets the picture cache recording time.
Contents
Turn the filter white memory function on/off.
Contents
Selects whether to enable the NFC function or not. When
"Execute" is selected, the NFC function turns on and
"Setting" is set to "Wi-Fi Access Point" temporarily, and
the camcorder goes into standby mode for NFC. When
"Cancel" is selected, settings return to the previous settings.
Sets the operation mode of the network connection.
Notes
• When you use the USB-RJ45 adaptor, select "Modem."
Set the channel of wireless LAN.
Displays the SSID and password of the wireless LAN.
Starts Wi-Fi Protected Setup (WPS).
Displays the name of the network device you are using.
Displays the IP address of the camcorder.
Displays the subnet mask of the camcorder.
Displays the MAC address of the wireless LAN module of
the camcorder.
GB
GB
19