Sony PXW-X180 Mode D'emploi page 28

Notes
• It may take a time (for 30 to 60 seconds) until
appears on the screen. Wait until the flashing
"AP" indication for the wireless LAN connection
status on the LCD/viewfinder screen (page 2) is
turned on.
4
Hold the smartphone near the
camcorder.
The smartphone is connected to the
camcorder and "Content Browser Mobile"
starts.
Notes
• Cancel the sleep or screen lock function of the
smartphone in advance.
• Hold the device near to the camcorder without moving
the device until "Content Browser Mobile" starts (1 to
2 seconds).
Connecting to a WPS-compatible device
You can connect the camcorder to a WPS-
compatible device by using the WPS function.
1
Set the camcorder's network operation
mode to the Wi-Fi access point mode by
setting "Setting" in "Network" of the
System menu to "Wi-Fi Access Point."
Notes
• It may take a time (for 30 to 60 seconds) until the
camcorder is in the Wi-Fi access point mode.
Wait until the flashing "AP" indication for the
network connection status on the LCD/
viewfinder screen (page 2) is turned on.
2
Activate "WPS" in "Network" of the
System menu.
GB
6
3
Select "Network Setting" > "Wi-Fi
Setting" on the device, then set "Wi-Fi"
to on.
4
Select the camcorder's SSID from the
SSID list in "Wi-Fi Network" on the
device, then select "WPS Push Button"
in "Option" on the device.
Notes
• The operation method differs depending on the
device.
5
Start the browser on the device, then
access "http://192.168.1.1:8080/
index.html."
The screen for inputting "User Name" and
"Password" appears.
6
Input the user name and password, then
select "OK."
For the user name and password of the access
authentication, check "Basic Authentication"
of the System menu. For details, refer to
"System menu" in the Operating Guide.
Connecting by inputting an SSID and
password on a device
You can connect the camcorder to a device by
inputting an SSID and password on a device.
1
Set the camcorder's network operation
mode to the Wi-Fi access point mode by
setting "Setting" in "Network" of the
System menu to "Wi-Fi Access Point."
Notes
• It may take a time (for 30 to 60 seconds) until the
camcorder is in the Wi-Fi access point mode.
Wait until the flashing "AP" indication for the
network connection status on the LCD/
viewfinder screen (page 2) is turned on.
2
Select "Network Setting" > "Wi-Fi
Setting" on the device, then set "Wi-Fi"
to on.
3
Connect the device to the camcorder by
selecting the camcorder's SSID from
the SSID list in "Wi-Fi Network" and
inputting the password on the device.