Sony PXW-X180 Mode D'emploi page 32

Notes
• When you attach or remove the USB-RJ45
adaptor to the camcorder, perform one of the
following:
—Set both "Setting" in "Proxy Recording
Mode" of the Recording menu, and "Setting"
in "Network" of the System menu to "Off."
—Turn the camcorder off.
Connecting
1
Set the camcorder's network operation
mode to the modem mode by setting
"Setting" in "Network" of the System
menu to "Modem."
Notes
• It may take a time (for 30 to 60 seconds) until the
camcorder is in the wired LAN mode. Wait until
the flashing "3G/4G" indication for the network
connection status on the LCD/viewfinder screen
(page 2) is turned on.
• When connecting the camcorder with a LAN
cable, menu items and information displayed in
the monitor are the same as when the camcorder
is connected with a modem.
Uploading a File (PXW-
X180 only)
You can upload a proxy file or original file that is
recorded on the camcorder to the server on the
Internet via a 3G/4G/LTE line or access point.
Preparations
To connect to the Internet
Connect the camcorder to the Internet by
following the procedure of "Connecting to the
Internet (PXW-X180 only)" (page 8).
To register the server for uploading
Register the server for uploading in advance.
For details about registering the server, see
"Register the server for uploading" (page 17).
Selecting the file and uploading
Upload the proxy file that is recorded on an SD
card, or the original file that is recorded on an SxS
memory card, to the server.
GB
10
Uploading a proxy file on an SD card
1
Connect a device to the camcorder via a
wireless LAN, start the browser on the
device, then access the camcorder from
the browser (page 4).
2
Display the file list screen to select the
file.
Touch " " > "Media Info" > "SD Card."
The "SD Card" screen appears.
3
Select the file.
Select the file by touching the file. To cancel,
touch the file again.
You can check the file by double touching
the file to play back.
4
Touch "Transfer."
The server that you set to the default server at
"Default Server" in "Register the server for
uploading" (page 17) appears.
To change the server, touch the server to
display the server list, then select a server.
Input the directory for the server to
"Directory" if necessary.
5
Touch "Transfer."
The camcorder starts uploading the selected
file.
To cancel uploading, touch "Cancel."