Setup Menu - DeFelsko PosiTector RTR Guide D'utilisation

Reset
Reset (menu reset) restores factory settings and returns the Gage
to a known condition. The following occurs:
- All batches and stored datasets, batch names and screen
captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Statistics = OFF
Display = None
Perform a more thorough Hard Reset as follows:
1 Power down the Gage and wait 5 seconds.
Simultaneously press and hold the (+) and
2
buttons until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition.
It performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Alarm settings are set to defaults.
- Menu settings are returned to the following:
Units = microns
Flip Display = Normal
Sound = ON
NOTE:
Date, Time and WiFi are not affected by either Reset.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline","Lithium"or"NiMH" (Nickel-metal hydride rechargeable).
If NiMH is selected, the Gage will trickle charge the batteries while
connected via USB to a PC or optional AC charger. The battery
state indicator icon is calibrated for the selected battery type. No
damage will occur if the wrong battery type is selected. DeFelsko
recommends the use of eneloop (NiMH) rechargeable batteries.

Setup Menu

Bluetooth = OFF
WiFi = OFF
Auto Dim = ON
Language = English
Battery Type = Alkaline
Backlight = Normal
8
Tape Grade = XC
Linearize = ON
appears.
USB Drive = ON
Auto Sync = OFF
Bluetooth Smart = OFF
center