Setup Menu - DeFelsko PosiTector DPM Guide D'utilisation

Units
Converts the displayed units for temperature and wind velocity.
Temperature (all models): Celsius (°C) or Fahrenheit (°F)
Velocity (DPM-A only): m/s, ft/s, km/h, mph, and kn.
Reset
Memory = OFF
Auto Log = OFF
Trend Chart = None
Auto Dim = ON
Perform a more thorough Hard Reset as follows:
1 Power down the Gage and wait 5 seconds.
Simultaneously press and hold the (+) and
2
buttons until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition.
It performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Alarm settings are set to defaults.
- Menu settings are returned to the following:
Units (temperature) = Celsius
Flip Display = Normal
Auto Sync .net = ON
Alarms = OFF
Alarm Sound = OFF
Sound = ON
Language = English
NOTE:
Date, Time and WiFi settings are not affected by either Reset.

Setup Menu

Setup Menu
Bluetooth & Stream = OFF
WiFi & Access Point = OFF
Display = None
Anemometer = ON
Units (velocity) = m/s
Battery Type = Alkaline
Backlight = Normal
Bluetooth Smart = OFF
USB Drive= ON
Auto Log Interval = 5 min
Wet Bulb = OFF
4
appears.
center