DeFelsko PosiTector RTR Guide D'utilisation page 13

Bluetooth Smart
When Enabled,
running the PosiTector App (pg.10) via auto-pairing Bluetooth
Smart (BLE) wireless technology.
Sync Batches
Select batches to flag them for synchronization to the
PosiTector App. New batches created while Bluetooth Smart
is enabled are automatically selected.
With Bluetooth Smart enabled, select Sync Batches to transfer
batches to the PosiTector App. Only readings and
selected
batches that have yet to be synchronized with any smart device
are synchronized automatically.
NOTE:
Send Batches
Transfers selected
when switching between devices). The Send Batches option is
visible in the menu when the Gage is connected to a smart
device running the PosiTector App.
Updates
Determines if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
update. (see pg. 8)
(Advanced models with serial numbers 784000+ only)
allows communication with a smart device
batches to the PosiTector App (useful
The Gage will perform a Hard Reset after an
12