Setup Menu - DeFelsko PosiTector 200 Guide D'utilisation

Reset
Reset (menu reset) restores factory settings and returns the
Gage to a known condition. The following occurs:
- All batches, stored measurements, images, batch names and
screen captures are erased.
- All calibration and range adjustments are cleared and returned
to the Gage's factory settings.
- Menu settings are returned to the following:
Memory = OFF
Graphics = ON
Cal Lock = OFF
Auto Dim = ON
Perform a more thorough Hard Reset by powering down the
Gage, waiting several seconds, then simultaneously holding both
the center
appears. This returns the instrument to a known, "out-of-the-box"
condition. It performs the same function as a menu Reset with
the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following:
Units = microns
Flip Display = Normal
Language = English
Sound = ON
NOTE:
Date, Time and WiFi settings are not affected by either Reset
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (Nickel-metal hydride rechargeable).
If NiMH is selected, the Gage will trickle charge the batteries
while connected via USB to a PC or optional AC charger. The
battery state indicator icon is calibrated for the selected battery
type. No damage will occur if the wrong battery type is selected.

Setup Menu

Bluetooth = OFF
Bluetooth Smart = OFF
Display = None
WiFi & Access Point = OFF
and ( + ) buttons until the Reset symbol appears.
Bluetooth Smart = OFF
Battery Type = Alkaline
Backlight = Normal
USB Drive = ON
7
Layers = 1
Layer Name = Layer 1
Layer Color = blue