Setup Menu - DeFelsko PosiTector 6000 Notice D'instruction

Units
Converts the display from metric to imperial and vice versa.
Reset
Reset (menu Reset) restores factory settings and returns the
Gage to a known condition. The following occurs:
- All batches, stored measurements, batch names and screen
captures are erased.
- Calibration adjustments are returned to factory settings.
- Menu settings are returned to the following:
Memory = OFF
Hi Res = OFF
Statistics = OFF
Hi Lo Alarm = OFF
Scan Mode = OFF
Auto Dim = ON
Cal Lock = On
Perform a more thorough Hard Reset as follows:
1. Power down the Gage and wait 5 seconds.
2. Simultaneously press and hold the
until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition. It
performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following status:
Units = Metric
Touch = ON
Flip Lock = OFF
Auto Sync .net = ON
NOTES:
- Keep the gage away from metal during a Reset.
- Date, Time and WiFi settings are not affected by either Reset.

Setup Menu

Bluetooth & Stream = OFF
WiFi & Access Point = OFF
USB Keyboard & Stream = OFF
BLE Keyboard = OFF
Display = None
N Lock = OFF
appears.
Fast Mode = OFF
Sound = Medium
Language = English
Backlight = Normal
6
and buttons
Battery Type = Alkaline
Bluetooth Smart = OFF
USB Drive = ON