Hilti AG 500-7SE Mode D'emploi page 18

3.2 Intended use
The product described is a hand-held electric angle grinder. It is designed
for cutting and grinding metal and mineral materials, as well as brushing and
sanding, without the use of water. It may used only for dry cutting / grinding.
The tool may be operated only when connected to a power supply providing
a voltage and frequency in compliance with the information given on its
rating plate.
• The power tool may be used for cutting, slitting and grinding mineral
materials only when equipped with the corresponding guard and front
cover.
• A dust removal hood together with a suitable Hilti vacuum cleaner must
be used for working on mineral materials such as concrete or stone.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange,
clamping nut, wrench, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.4 Speed preselection
This angle grinder has adjustable speed preselection from 6000 to 11500
rpm in 6 speed settings.
3.5 Restart interlock
The power tool does not restart by itself when the on/off switch is locked
in the on-position and the power returns after an interruption in the electric
supply. The on/off switch must first be released and then pressed again to
restart.
3.6 Front cover for the disc guard
When grinding with straight grinding discs and cutting with cutting discs
in metalworking applications, use the standard guard with front cover.
3.7 DG-EX 115/4,5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup
wheels for grinding mineral materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8 DC-EX 125/5"C dust hood for cutting (accessory)
Use the DC-EX 125/5"C dust hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
10 English
Printed: 12.09.2017 | Doc-Nr: PUB / 5373357 / 000 / 02
2
3
4