Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
▶ Before starting work, check the hazard class of the dust that will be pro-
duced when working. Use an industrial vacuum cleaner with an officially
approved protection class in compliance with the locally applicable dust
protection regulations. Dust from materials such as lead-based paint,
certain types of wood and concrete/masonry/stone containing quartz,
minerals or metal may be harmful to health.
▶ Make sure that the workplace is well ventilated and, where necessary,
wear a respirator appropriate for the type of dust generated. Contact with
or inhalation of the dust may cause allergic reactions and/or respiratory
or other diseases among operators or bystanders. Certain kinds of dust
are classified as carcinogenic such as oak and beech dust, especially
in conjunction with additives for wood conditioning (chromate, wood
preservative). Material containing asbestos may be handled only by
specialists.
▶ Take breaks between working and do physical exercises to improve the
blood circulation in your fingers. Exposure to vibration during long periods
of work can lead to disorders of the blood vessels and nervous system in
the fingers, hands and wrists.
Electrical safety
▶ Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool may
give you an electric shock if you damage an electric cable accidentally.
Using and handling power tools with care
▶ Do not use cutting discs for grinding.
▶ Tighten the accessory tool and flange securely. If the accessory tool and
flange are not tightened securely, the accessory tool may work loose from
the spindle due to the braking effect of the motor after switching off.
▶ Comply with the manufacturer's instructions for handling and storing
grinding discs.
3 Description
3.1 Product overview
Arbor lockbutton
@
Steadying rib for set-down
;
On/off switch
=
Speed adjustment thumb-
%
wheel
Side handle
&
Pin wrench
(
Clamping nut
)
Abrasive cutting disc/abrasive
+
grinding disc
Printed: 12.09.2017 | Doc-Nr: PUB / 5373357 / 000 / 02
1
§
/
:
∙
$
£
|
Clamping flange
Guard
Clamping lever
Adjusting screw
Arbor
Keyed locating lug
Threaded socket for side han-
dle
English
9
Publicité
Table des Matières
