Hilti AG 500-7SE Mode D'emploi page 19

4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum diam-
eter of Ø 5" and a maximum disc thickness of 1/4" (grinding discs) or 1/8"
(cutting discs) which are approved for use at a rotational speed of at least
11,500/min and a peripheral speed of 80 m/s may be used.
WARNING! When cutting or slitting with cutting discs, always use the
standard guard with additional cover plate.
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Wire brushes
Abrasive resin-fiber disc
Suitability of discs for the equipment used
Item Equipment
A Guard
B Front cover (in
combination
with A)
C DG-EX 115/4.5"
dust hood for
grinding (only
for 115 DG-CW)
D DC-EX 125/5"C
dust hood for
cutting (only in
conjunction with
A)
Printed: 12.09.2017 | Doc-Nr: PUB / 5373357 / 000 / 02
Application
Cutting, slit-
ting
Cutting, slit-
ting
Rough grind-
ing
Rough grind-
ing
Wire brushes 3CS, 4CS,
Rough grind-
ing
AC­D AG­D, DG-
AF­D, CW
AN­D (SPX,
SP, P)
X X
X —
— —
— —
Designation Material
AC­D Metal
DC-TP, DC-D Mineral
(SPX, SP, P)
AG-D, AF-D, Metal
AN-D, AG-D
type 27
DG-CW Mineral
(SPX, SP, P)
Metal
3SS, 4SS
AP-D Metal
DC- AP-D
TP,
DC-D
(SPX,
SP, P)
X X
— X —
X — —
— X —
3CS,
4CS,
3SS,
4SS
X X
—
—
—
English 11