Optika Italy ACCESSORIES Serie Manuel D'instructions page 15

4. Remove the specimen from the stage.
5. Turn the polarizer knob ⑧ under the condenser
to achieve maximum darkening of the eyepieces,
and then tighten the polarizer locking screw ⑤.
(Fig. 23)
6. Once the maximum darkening is achieved, re-
move the slider from the nosepiece, remove the
analyzer from the dummy slider and insert it into
the DIC prism. Now insert the DIC slider ⑨ into
the slot ⑦. (Fig. 24)
7. Rotate the condenser turret ⑩ to insert the DIC
prism matching the objective in use. (Fig. 25)
8. Put a specimen on the stage and focus.
9. Begin the observation by turning the knob on the
DIC slider ⑪ to obtain a three-dimensional effect
of the sample. (Fig. 26)
⑤
⑩
Page 15
⑧
F ig. 23 F ig. 23
⑨
⑦
F ig. 24 F ig. 24
F ig. 25 F ig. 25
⑪
F ig. 26 F ig. 26