Capital Safety DBI SALA 8561233 Manuel page 6

DESCRIPTION
EN
The DBI-SALA Side Entry System (Figure 1) is designed for single user confi ned space entry/retrieval and rescue
operations involving horizontal entries with vertical positioning or retrieval required inside the space. The Side
Entry System may be used with the model 8541683 External Adjustable Tank Collar for adaptation to different
manways. It may also be used with a permanently mounted base and extension post. The Side Entry System
features fl exible setup options and a fully articulating boom system. It is fully adaptable to an infi nite number of
manway designs and surrounding confi gurations.
WARNING: This product is part of a personal restraint, work positioning, suspension, or rescue system.
These instructions must be provided to the user and rescuer (see section 7 Terminology). The user must read
and understand these instructions or have them explained to them before using this equipment. The user
must read and follow the manufacturer's instructions for each component or part of the complete system.
Manufacturer's instructions must be followed for proper use and maintenance of this product. Alterations or
misuse of this product or failure to follow instructions may result in serious injury or death.
WARNING: It is essential to the safety of the user that if this product is re-sold outside the original country
of destination, the reseller shall provide instructions for use, for maintenance, for periodic examination and
for repair in the language of the country in which it is to be used.
See 'Glossary' in General Instructions for Use and Maintenance IFU 5902392 for identifi cation of numbered items
in white boxes.
Side Entry System Components (See Figure 2):
1 Primary Boom Assembly
2 Elbow Pin
3 Secondary Boom Assembly
4 Secondary Boom Positioning Pins (2)
5 Support Post Assembly
6 Support Post (sold separately)
7 Mast Extension (sold separately)
8 Permanent Base (sold separately)
9 Support Post Positioning Pin
10. Digital Winch (sold separately)
11. Bracket, External Adjustable Tank Collar (sold separately)
IMPORTANT: If you have questions on the use, care, or suitability for use of this equipment, contact
DBI-SALA immediately.
1.0 APPLICATION
1.1 PURPOSE: The Side Entry System is designed for single user confi ned space entry / retrieval and rescue
operations involving manways in the side of tanks, boilers, columns, silos, etc. The Side Entry System
provides a platform for the mounting of various devices for Fall Protection, Vertical Work Positioning,
Retrieval and Rescue.
The Side Entry System can be installed using DBI-SALA Internal or External Adjustable Tank Collars, or a
wide variety of standard Fixed Base options.
1.2 LIMITATIONS: The following application limitations must be recognized and considered before using this
product:
A. CAPACITY: The maximum working load for this product is 1 person. Use of various accessories may
reduce the allowable weight to be vertically positioned or retrieved.
B. SIDE ENTRY SYSTEM: Equipment selected for use with this Side Entry System must meet the system
performance and other criteria as stated in section 2.0.
C. PHYSICAL AND ENVIRONMENTAL HAZARDS: Use of this equipment in areas with physical or
environmental hazards may require that additional precautions be taken to reduce the possibility of
damage to this equipment or injury to the user. Hazards may include, but are not limited to: high
heat (welding or metal cutting), corrosive environments such as exposure to seawater, explosive or
toxic gases, moving machinery or sharp edges. Contact Capital Safety if you have questions about the
application of this equipment in areas where physical or environmental hazards are present.
6