Measuring Dutycycle; Measuring Dbm - Amprobe 38XR-A Mode D'emploi

1.800.561.8187

Measuring Dutycycle

1. Set the Function Switch to %.
2. If Hz is displayed, press the yellow button to display %.
3. Connect the Test Leads: Red to %, Black to COM.
4. Connect the Test Probes to the signal source.
5. Read the display.
5
38XR-A
2
1
3

Measuring dBm

The 38XR-A measures dBm relative to 1 mW referenced to 50 Ω.
That is, 10 dBm = 10 mW, 0 dBm = 1 mW, -10 dBm = 0.1 mW, etc.
1. Set the Function Switch to k.
2. Press the yellow button. The display shows dBm to verify
the selection.
3. Connect the Test Leads: Red to E, Black to COM.
4. Connect the Test Probes to the signal source.
5. Read the display.
15
www. .com
4
information@itm.com