Amprobe 38XR-A Mode D'emploi page 11

1.800.561.8187
Measuring AC + DC Voltage (True rms)
See Additional Features to find out the advantages of true rms.
1. Set the Function Switch to v.
2. If DC is displayed, press the yellow button to turn on
AC+DC.
3. If RANGE is displayed, press the RANGE button to
enable autoranging.
4. Connect the Test Leads: Red to E, Black to COM
5. Connect the Test Probes to the circuit test points.
6. Read the display, and, if necessary, correct any
overload (0o) conditions.
Measuring AC Voltage (True rms)
See Additional Features to find out the advantages of true rms.
1. Set the Function Switch to V.
2. If dBm is displayed, press the yellow button to turn on AC.
3. If RANGE is displayed, press the RANGE button to
enable autoranging.
4. Connect the Test Leads: Red to E, Black to COM
5. Connect the Test Probes to the circuit test points.
6. Read the display, and, if necessary, correct any
overload (0o) conditions.
6
38XR-A
2
3
1
4
6
www. .com
5
information@itm.com