Diodetest; Auxiliary Features - Amprobe 38XR-A Mode D'emploi

1.800.561.8187
DIODE TEST
Test current 0.5 mA (approximate)
Accuracy ±(1.5 % rdg + 5 dgts)
Resolution 1 mV
Open circuit volts 3.0 V dc typical
Overload
1000 V dc or 750 V ac rms
protection

AUXILIARY FEATURES

Beeps to warn test leads are connected
h or 10A Test to measure current, but the Function/
Lead Connection Range Switch is not set to measure
current
Displays the minimum, maximum, or
MIN MAX AVG average value detected while making
a measurement
HOLD Holds the latest reading on the display
REL Initiates relative measurements
Record the peak+ or peak- value in a
PEAK±
measurement
RANGE Initiates manual range mode
Backlight Backlight auto-off approx. 60 seconds
Auto Power off 30 minutes, typical
Shift Shift to dBm, ac, dc, ac+dc, continuity,
(yellow button)
duty cycle, or RS232
30
www. .com
information@itm.com