Britax Infant Car Seat Removal; Folding Stroller With Icsa Attached - BOB DUALLIE Instructions

BRITAx INFANT CAR SEAT
REMOVAL
Press the Click & Go release buttons
on each side and lift the Infant Car
Seat away from the ICSA.
FOLDING STROLLER WITH
ICSA ATTACHED
Care must be taken when
folding and unfolding the
stroller to prevent finger
entrapment or injury.
To avoid injuries, never fold
or unfold stroller with other
individuals within reach of
stroller.
1. Set Parking Brake
Set parking brake (see stroller owner' s
manual if necessary).
2. Unfasten Restraint Belt
Unfasten buckle, place Restraint Belt ends
to sides of stroller seat.
3. Remove Infant Car Seat
Remove Infant Car Seat from ICSA.
4. Empty Stroller
Remove contents from low boy cargo
basket and pockets.
5. Fold Handlebar
Squeeze both handlebar release levers
simultaneously (see stroller owner' s
manual if necessary).
6. Rotate Handlebar Forward
Slightly rotate handlebar towards seat and
hold in place during next step.
7. Lift Red Frame Release Handle
Using a short, quick tug, lift red frame
release handle up. Keep tires on ground
as stroller collapses toward front wheel
(see stroller owner' s manual if necessary).
NOTE: We do not recommend
leaving stroller folded with ICSA
installed for long periods of time as
it may leave an imprint in the stroller
seat. For long term folded storage,
remove ICSA.
15
P637500A