Setting The Parking Brake; Securing The Child In The Seat - BOB REVOLUTION FLEX DUALLIE Guide De L'utilisateur

Setting the Parking Brake

The parking brake prevents the
stroller from moving while loading
and unloading. The parking brake is
not designed as a stopping brake.
To set the parking brake, press down
on the foot pedal – making sure the
locking pin fully engages the locking
disk.
LOCKED POSITION
To ensure the brake is set properly,
attempt to roll the stroller forward
and backward after setting the
brake. If the stroller will not roll, the
brake is set properly.
To release the parking brake, lift up
on the foot pedal with your foot until
the brake bar springs up into the fully
unlocked position.
UNLOCKED POSITION
Do not park on inclines� The
parking brake is intended
to park the stroller on flat
surfaces only� Parking on
inclines may result in tip over
or runaway stroller�
REVOLUTION FLEX DUALLIE User Guide

Securing the Child in the Seat

Before each use, check the harness
and its components to make sure
they are in good condition and good
working order.
1� Set Parking Brake
Rotate parking brake down into
locked position.
NOTE: Rear wheels should not
rotate when parking brake is set.
2� Place Child In Seat
Slip one shoulder strap over each
shoulder. Position buckle strap
between legs.
Shoulder Strap
Buckle Strap
3� Fasten Shoulder Straps
Insert both shoulder strap
tongues into the buckle.
NOTE: Buckle strap should be
adjusted to have a snug fit.
Buckle
4� Adjust Shoulder Strap Height
Adjust height of shoulder strap
to fit just above child shoulder
height.
11