Installing Icsa; Preparing To Attach Infant Car Seat - BOB DUALLIE Instructions

2. Unfasten Restraint Belt Buckle
Unfasten buckle of Restraint Belt and
place buckle ends to the
sides of stroller seat.
3. Slide Covers Down
Push to slide each Cover (at front of
stroller Accessory Adapters) down
on each side of stroller, exposing
each Receiver Socket.

INSTALLING ICSA

1. Align Locking End Caps
Align and insert each Locking End
Cap on ICSA into each respective
Accessory Adapter Receiver
Socket.
CLICK
2. Verify Proper Installation
Pull on center of ICSA Front
Tube to verify ICSA is securely
locked into place.
pREpARING TO ATTACH
INFANT CAR SEAT
Failure to securely attach
Infant Car Seat and properly
secure infant with seat
harness of Infant Car Seat
may result in accident,
serious injury or death.
NOTE: When attaching Infant Car
Seat to ICSA for the first time,
practice attaching and removing
unoccupied Infant Car Seat several
times until the function becomes
familiar.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar, place Restraint Belt
ends to the sides of stroller seat.
CLICK
2. Place Infant Into Infant Car Seat
Fasten harness securely (see
Infant Car Seat owner's manual if
necessary).
3. Position Infant
Car Seat Carry
Handle
Move Infant Car
Seat Carry Handle
into upright
position.
11
P637500A