Define Home Display; Display Settings; Store Settings" ("Store Actual Settings"); Recall Settings" ("Recall Stored Settings") - Grundfos CRE Notice D'installation Et De Fonctionnement

7.31 "Define Home display"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced control panel.
In this menu, you can set the "Home" display to show up to four
user-defined parameters.
Factory setting
See section 10. Technical data.

7.32 "Display settings"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced control panel.
In this menu, you can adjust the display brightness and set
whether or not the display is to turn off if no buttons have been
activated for a period of time.
Factory setting
See section 10. Technical data.

7.33 "Store settings" ("Store actual settings")

Pump variant
CME
CRE, CRIE, CRNE,
CRKE, SPKE, MTRE
Grundfos GO
In this menu, you can store the actual settings for later use in the
same pump or in other pumps of the same type.
Advanced control panel
In this menu, you can store the actual settings for later use in the
same pump.

"Define Home display"

●
●

"Display settings"

●
●
"Store settings"
("Store actual settings")
●
●

7.34 "Recall settings" ("Recall stored settings")

Pump variant
CME
CRE, CRIE, CRNE,
CRKE, SPKE, MTRE
Grundfos GO
In this menu, you can recall stored settings from a number of
previously stored settings that the pump then uses.
Advanced control panel
In this menu, you can recall the last stored settings that the pump
then uses.
7.34.1 "Undo"
Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in Grundfos GO.
In this display, you can undo all settings that have been made
with Grundfos GO in the current communication session. Once
you have recalled settings, you cannot undo.

7.35 "Pump name"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in Grundfos GO.
In this display, you can give the pump a name. In this way, you
can easily identify the pump when connecting with Grundfos GO.
"Recall settings"
("Recall stored settings")
●
●
"Undo"
●
●
"Pump name"
●
●
55