SOUNDMASTER UR220 Mode D'emploi page 26

UR220 / English Manual
Proceed as follows:
1. In standby mode, Press the unit Alarm1 button (12) or the remote control
button (8). The currently set alarm time is shown.
2. Keep the button pressed for approx. 3 seconds when the alarm time is
displayed. The hours of the currently set alarm time start to flash.
3. Use the unit buttons (10) and (11) or the remote control button (7) and (11) for
setting.
4. Press the unit Alarm 1 button (12) or the remote control button (8) for
confirmation. The minutes start to flash.
5. Use the unit buttons (10) and (11) or the remote control button (7) and (11) for
setting.
6. Now select the days you want the alarm to sound. The following selections can
be made:
• 1-5 = Monday to Friday
• 1-7 = Monday to Sunday
• 6-7 = Saturday and Sunday
• 1-1 = Weekday
6a. When you have selected the setting 1-1:
1. Press the button to select the weekday.
2. Make your selection with the buttons and.
(1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday, 6 =
Saturday, 7 = Sunday)
7. Press the button to confirm. Then select how you want to be awakened. Select
from:
• "bu" (buzzer):
A buzzer sounds when the alarm time is reached.
The buzzer interval increases from slow to fast. The volume cannot be adjusted.
• Radio frequency is displayed:
As soon as your set alarm time is shown, the radio switches on. The last set
station is played. The volume increases slowly to the set volume. The volume
cannot be adjusted.
• NS (natural sound):
As soon as your set alarm time is shown, the natural sound switches on. The
natural sound is played. The volume increases slowly to the set volume. The
volume cannot be adjusted.