SOUNDMASTER UR220 Mode D'emploi page 25

UR220 / English Manual
ALARM SETTING
You can set two alarm times. 6 different alarm options are available: Radio +
Light / Radio / Buzzer + Light / Buzzer / Natural sound + Light / Natural sound.
The setting sequence for AL1 and AL2 is as follows:
In radio off mode, Press the main unit alarm set buttons (12) and (13) or the
remote control buttons (8) and (10) to show the alarm time. Afterwards keep
depress the unit alarm set button (12) and (13) or the remote control button (8)
and (10) over 2 seconds to enter the alarm set mode. After enter the setting
mode, press the unit alarm set button (12) and (13) to change the mode cycle as
follows:
SETTING THE ALARM 1 (BEEPER)
Normal Time→ AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 beeper
→Light → Light intensity → Normal Time.
SETTING THE ALARM 1 (RADIO)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL 1 beeper
→ AL 1 radio → AL 1 final radio volume →AL 1 Light → AL 1 Light intensity →
Normal Time.
SETTING THE ALARM 1 (NATURAL SOUND)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL 1 beeper
→ AL 1 radio →AL 1 natural sound →(Use the unit buttons (10) and (11) or the
remote control buttons (7) and (11) to select the desired natural sound) →AL 1
final natural sound volume →AL 1 Light → AL 1 Light intensity → Normal Time
SETTING THE ALARM 2 (BEEPER)
Normal Time→ AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 beeper
→Light → Light intensity → Normal Time.
SETTING THE ALARM 2 (RADIO)
Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2 beeper
→ AL 2 radio → AL 2 final radio volume →AL 2 Light → AL 2 Light intensity →
Normal Time.
SETTING THE ALARM 2 (NATURAL SOUND)
Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2 beeper
→ AL 2 radio →AL 2 natural sound →(Use the unit buttons (10) and (11) or the
remote control buttons (7) and (11) to select the desired natural sound) →AL 2
final natural sound volume →AL 2 Light → AL 2 Light intensity → Normal Time.