Radio Tuning - SOUNDMASTER UR220 Mode D'emploi

UR220 / English Manual
Display Brightness (in standby)
In standby mode, Press the unit DIMMER button (8) or the remote control
DIMMER button (3) to adjust the display brightness.
Display on/off function
•In standby mode, press and hold unit SOURCE button (9) or the remote control
SOURCE button (2) for 3 seconds. "ON" appears on the display (2).
•After 15 seconds, the display (2) turns off.
•Press any button to turn the display (2) on for another 15 seconds.
•To deactivate the display on/off function, press and hold unit SOURCE button (9)
or the remote control SOURCE button (2) for 3 seconds. "OFF" appears on the
display (2).
Reading light function
1. Press the unit button (3) or the remote control button (4) to turn on the
function.
2. Use the unit button (5) or the remote control button (17) to increase the
brightness. use the unit button (4) or the remote control button (18) to reduce the
brightness.
3. In order to turn off the function, press the button again.
Mood light
1. Press the unit button (6) or the remote control button (5) to turn on the mood
light. The light will alternate in different colors.
2. Press and hold the unit button (6) for about 3 seconds or Press the remote
control button (16) to stop or start the mood light color changing.
3. In order to turn off the mood light, press the unit button (6) or the remote
control button (5) again.
Toggle temperature display between °C (Celsius) and °F (Fahrenheit)
1. Press the device to standby mode using the unit button (14) or the remote
control button (1).
2. Press the unit button (7) or the remote control button (6) to display the
temperature.
3. While the temperature is displayed, press the unit button (10) or the remote
control button (6) for about 3 seconds to switch between °C and °F.

RADIO TUNING

1. In standby mode, Press the unit on/off button (14) or the remote control on/off
button(1) to turn the unit 'On'.
2. The LED DISPLAY will show the radio frequency for about 5 seconds and then
revert to normal time display.