Settings Via The Osd Menu; Menu Line; Camera Id Display Of A Camera Identification - Monacor TVCCD-1622COL Mode D'emploi

2) With the manual focus activated, adjust a sharp picture
GB
with the focus buttons (2):
Button "N" (near): focussing of objects nearby
Button "F" (far): focussing of objects far away
Via the OSD menu, adjust the response of the focus but-
tons more precisely in the line F-DETAIL (see page 26).

6.3 Settings via the OSD Menu

1) Keep the button ENTER (3) pressed for 2 seconds until
the first menu page (fig. 7) appears on the monitor.
2) With the buttons
where a setting is to be modified. A menu line selected
will appear in black letters.
3) With the buttons
4) It is possible to call the second menu page from the first
menu line CAMERA ID with the button
last menu line MIRROR with the button
5) To exit the menu, select the line EXIT on the second
menu page and press the button ENTER.
22
and (1), select the menu line
and (2), select the desired setting.
or from the
.
SETUP MENU
CAMERA ID OFF
FOCUS A/F
SHUTTER AUTO
AGC MIDDLE
BLC OFF
W/B ATW
COLOR COLOR
DZOOM OFF
NEGATIVE OFF
MIRROR OFF
display of a camera identification
CAMERA ID
For displaying a camera identification on the monitor,
select the setting ON with the button
the button ENTER (3). The submenu for entering the
name will appear:
ABCDEFGHIJKLMNOP
QRSTUVWXYZ +*!#$
0123456789<>%-/~
POS CLR DEL EXIT
______________
[
"
Fig. 8 Submenu for entering a camera identification
Fig. 7
First menu page
o (2), then press
]