Focus Focus Mode; Shutter Automatic Or Manual Shutter; Agc Automatic Gain Control; Blc Backlight Compensation - Monacor TVCCD-1622COL Mode D'emploi

1) With the cursor keys
first character and confirm with the button ENTER. The
arrow in the lower menu line will go to the next position.
2) Repeat the procedure for a maximum of 14 characters.
3) If a wrong character has been accidentally entered,
select the menu item DEL and delete the last character
entered with the button ENTER. For deleting the whole
identification, select the menu item CLR and press the
button ENTER.
4) After entering the identification, define the position
where the identification is to be displayed on the moni-
tor: Select the menu item POS and press the button
ENTER. Use the cursor keys to move the identification
to the desired position and press the button ENTER.
5) To exit the submenu, select the menu item EXIT and
press the button ENTER. The first menu page will reap-
pear.
focus mode
FOCUS
As already described in chapter 6.2, the camera offers
three focus modes. Select the mode in this menu line or
use the button AUTO (7) if the menu has disappeared.
A/F autofocus (permanently active)
M/F manual focus setting with the buttons "N" and "F" (2)
, , , and (1, 2), select the
PUSH autofocus just once after modification of the zoom
setting
automatic or manual shutter
SHUTTER
The electronic shutter can be set to automatic control
depending on the lighting conditions (control range
1
/ s) or to a fixed value, e. g. for focussing objects
10 000
moving fast by using a short exposure time. The following
settings are possible:
AUTO (automatic), 1 / s,
50
1 / s, 1 / s and 1 /
2000 4000 10 000
AGC automatic gain control
The control range of the AGC can be set to LOW (18 dB),
MIDDLE (24 dB), or HIGH (28 dB). For special applica-
tions, it is possible to deactivate the AGC (setting OFF).
The AGC will increase the video signal level in case of
poor lighting, however, with a high amplification, the S/N
ratio of the camera will deteriorate. The factory setting of
the camera is MIDDLE which is the optimum setting for
most surveillance applications.
BLC backlight compensation
Objects appearing in the backlight can be made brighter
with this function. For this purpose, select the compensa-
tion level X1, X2, or X3.
1 / s, 1 / s, 1 / s, 1
120 250 500
s.
GB
1
/ –
50
/ s,
1000
23