Additional Base Stations - switel BDT750 Mode D'emploi

8.14

Additional base stations

You can increase the range of the handsets by using several base stations. In order to
make use of this effect, all base stations must be connected to a telephone socket.
Depending upon the application, you can allocate the same telephone number to each base
station or you can give the base stations different numbers. Make sure that the ranges of all
base stations overlap. Please test the range of the handsets before putting a new base
station into operation.
If a handset is logged on to the base station and if the automatic base station selection is
activated (further information in this chapter), the handset is always forwarded automatically
to the nearest base station. Current calls cannot be transferred from one base station to
another.
Selecting a base station
1. Press the
2. Select the REGISTER menu with
3. Select the SELECT BASE menu with
4. The display will now show all base stations that the handset is already logged on to.
The number of the currently active base station will flash. Select the required base
station to which the handset is to be switched by means of the number pad.
Or change to the AUTO setting with the
handset changes automatically to the nearest base station when the connection to the
current base station becomes too weak.
5. Confirm with the
126
- Special functions -
button on the handset.
button.
and and confirm with
and and confirm with
and buttons. With this setting, the
.
.