4
Operation
4.1
Setting the clock alarm
You can choose to wake from two types of alarm, RADIO or BUZZER ALARM. Use the switch on the
back of the phone to Select RADIO (radio alarm) or BUZZ (buzzer alarm). To set the clock alarm,
proceed as follows:
1.
Press the ALARM SET button. The
2.
Now press UP/HOUR button to increment the clock digit.
3.
Press DOWN/MIN button to increment the minute digit.
4.
After the LCD displays a correct alarm time, press ALARM SET button again to confirm. The clock
digits stop to flash and return to clock display.
4.2
Setting the alarm
To turn on the alarm, press the ALARM SET button. The
flashing and the time of alarm will be shown. After 5 seconds elapse, the
that the clock alarm is on.
To turn off the alarm, press the ALARM SET button. The
flashing and the time of alarm will be shown. Press the ALARM SET button again, the
off.
4.3
Using the Snooze button
When the clock alarm sounds, you can use the SNOOZE button to temporarily turn off alarm. The alarm
will come on again after 10 minutes. To turn off the alarm, press any other buttons on the base unit.
4.4
Using the radio
Use the RADIO ON/OFF , the radio LED comes on to indicate the radio is on. To turn off the radio,
press the RADIO ON/OFF button again. The radio LED tuns off to indicate the radio is off.
Use the Radio Volume Switch located at the right side of the unit for adjusting the radio volume.
Your TCR10 has both FM and AM radio reception. Press the RADIO FM/AM button to select FM or AM
radio stations.
To select the radio channel frequency, use the UP/HOUR button to increase the radio frequency or use
the DOWN/MIN button to decrease the radio frequency. If you press and hold the button for 1 second,
the unit will start auto frequency search. The frequency will search for the next available good radio
station.
Note: The Radio alarm will play the last selected radio station and the radio alarm level will be the last
volume setting.
38
All manuals and user guides at all-guides.com
- Operation -
icon and clock digits will be flashing.
icon and the current alarm time will be
icon comes on to indicate
icon and the current alarm time will be
icon will be