Functional Description; General - HYDAC ELECTRONIC CANopen HAT 3800 Notice D'utilisation

10

3 Functional description

HAT 3800 is an absolute measuring singleturn angle sensor for highly precise rotational
angle measurement in mobile machines.
The functioning method of the angle sensor is based on a contactless magnetic
scanning. The sensor system consists of two components: the magnetically encoded
disc (pole disc) which is mounted free of backlash inside of the shaft, and the sensor
component.
By means of two sensors, mounted with an offset of 180° with integrated Hall sensor
elements, the sensor detects the rotational angle of the shaft. An intelligent electronic
evaluation unit converts the values into an electrical signal.
E
The digitized measured value is provided to the CAN field bus system via the CANopen-
Safety protocol.
Sensors

4 General

The HAT 3000 angle sensor series are subjected to individual calibration and final testing
on a computer operated test station. They are maintenance-free and operate perfectly
when used according to the specifications (see Technical Data).
However, if there is a cause for complaint, please contact HYDAC Service. Interference
by anyone other than HYDAC personnel will invalidate all warranty claims.
The EDS file and its corresponding protocol description can be downloaded from our
internet site using the path:
→Products→Sensors→Product search
http://www.hydac.com/uk-en/products/sensors/show/Material/index.html
Entering the part number (9xxxxx) the corresponding ZIP file appears
(HAT-file_9xxxxx_ HAT 38XX – FXX – XXXX – P01 – XXXX – XXX – 000.ZIP),which
contains the EDS files and their respective protocol descriptions.
If you have any queries regarding technical details or the suitability of the unit for your
application, please contact our Technical Sales Department.
Edition: 2021-02-18
Encoded disc
Figure 1
HYDAC ELECTRONIC GMBH
HAT 3800 CANopen
Drive shaft
Part No.: 669968