Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
2 Security
2.1 Definition of symbols and instructions
WARNING !
E
CAUTION !
2.2 Intended use / foreseeable misuse
Claims for defects or liability, regardless of the legal foundation, do not apply with
incorrect or improper installation, commissioning, usage, handling, storage, maintenance,
repair, use of unsuitable components or other circumstances, which the manufacturer is
not responsible for.
The manufacturer assumes no responsibility for determining the interfaces for installation
in a system or the installation, use or functionality of the product in this system.
2.3 Obligation of the operator before start-up
In accordance with the EC Machinery Directive, the measuring system of a component
is considered to be a machine part for the installation into a system/machine. Moreover,
the conformity of the measuring system was investigated in respect of the EMC
Directive.
It is therefore only permitted to start up the measuring system if it has been established
that the system/machine into which the measuring system is to be fitted satisfies the
provisions of the EC Machinery Directive, the EC EMC Directive, the harmonized
standards, European standards or the corresponding national standards.
Edition: 2021-02-18
means that death, serious injury or major damage to property could occur
if the stated precautions are not met.
means that minor injuries or damage to property can occur if the stated
precautions are not met.
indicates important information or features and application suggestions
for the product used
means that appropriate ESD-protective measures must be considered
according to DIN EN 100 015-1.
(Cause of a potential equalization between body and device-mass as well
as the housing-mass about a high-impedance resistance (approx. 1
MOhm) e.g. with a commercial ESD wrist strap).
HYDAC ELECTRONIC GMBH
HAT 3800 CANopen
Part No.: 669968
Publicité
Chapitres
Table des Matières
