Alarm Function - Conrad S3318P Mode D'emploi

l) Alarm Function
Displaying the Alarm Time
Push the button „MODE" (1) briefly several times to switch between the time, alarm time 1 („A1"
in the display behind the alarm time) and alarm time 2 („A2").
Setting the Alarm Time
• Push the button „MODE" (1) briefly several times until alarm time 1 or 2 is displayed (alarm
time 1 = „A1" in the display, alarm time 2 = „A2").
• Push the „MODE" button (1) for about three seconds until the sound signal is issued.
The alarm time hours flash.
• Set the alarm time hours with the buttons „UP/ALARM" (2) and „DOWN/DCF" (3). Keep the
respective button pressed for quick adjustment.
• Briefly push the button „MODE" (1).
The alarm time minutes flash.
• Set the alarm time minutes with the buttons „UP/ALARM" (2) and „DOWN/DCF" (3). Keep the
respective button pressed for quick adjustment.
• Briefly push the button „MODE" (1) to terminate the setting mode and show the current time
again.

Activating setting mode (independently of whether or not the alarm time is changed),
the respective wake-up function is activated automatically, and the icon „
time 1) or „
Switching the Alarm Function On/Off
• Push the button „MODE" (1) briefly several times until alarm time 1 or 2 is displayed (alarm
time 1 = „A1" in the display, alarm time 2 = „A2").
• Briefly push the button „UP/ALARM" (2) repeatedly to activate or deactivate alarm time 1 or
2. Both alarm times can be activated in this manner as well.
When the icon „
1
alarm time is active.
52
" (alarm time 2) appears (G).
2
" (alarm time 1) or „ " (alarm time 2) is displayed (G), the corresponding
2
" (alarm
1