Machine Identifi Cation; Technical Data; Residual Risks; Safety Rules - Saeco OFFICE One SUP028R Mode D'emploi

Use of the machine - User Manual
If the instruction book is lost or in a deteriorated state, immediately request
another copy from your service provider.
For further information or an explanation of problems not completely or suf-
fi ciently addressed in these instructions, contact the service provider.
1.4 Machine identifi cation
The machine is identifi ed by the name of the model and the serial number
shown on the identifi cation plate.
The plate includes the following information:
• Manufacturer's name
• CE marking
• machine model
• Serial no.
• year of manufacture
• several engineering specifi cations:
- power supply voltage (V).
- power supply frequency (Hz).
- electrical power consumption (W).
Note: when submitting any kind of request to the Service Provider,
always refer to this plate and indicate the specifi c data reported
on it.
1.5

Technical data

Nominal voltage
See identifi cation plate on the bottom of the appliance
Power rating
See identifi cation plate on the bottom of the appliance
Power supply
See identifi cation plate on the bottom of the appliance
Machine body material
Thermoplastic
Size (w x h x d)
300 x 420 x 450 (mm)
Weight
10.5 kg (approx.)
Cable length
Water tank capacity
Dreg drawer capacity
25 capsules
Capsule type
Supplied by service provider
Control panel
A-Weighted sound pressure level:
Below 70dB
Pump pressure
Max 1.5MPA (15 bars)
Operating conditions
Minimum temperature: 10°C
Maximum temperature: below 40°C
Maximum humidity: below 95%
Safety devices
Boiler pressure safety valve
Safety thermostat
Subject to engineering and manufacturing changes due to technological
development.
The machine conforms to the European Directive 89/336/EEC (Italian Legislative
Decree 476 dated 04/12/92) concerning electromagnetic compatibility.
• 28 •
1.2 m
5.0 Litres
Front
1.6

Residual risks

The dispensing outlet has no guards to prevent accidental hand contact with
coffee, hot beverages and/or steam.
2

SAFETY RULES

Never put live parts in contact with water: danger of short circuit!
Hot water and steam can cause scalding!
Intended use
This coffee machine is designed for use only in small offi ces and institutions.
Do not make any technical changes or use the machine for unlawful purposes
since this would create serious hazards! This appliance is not intended for
use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
Power supply
The machine must be connected to the power supply supplied by the Service
provider, in accordance with the electrical system specifi cations.
Power cord
Never use the machine if the power cord is defective.
Immediately inform the service provider if the cord and/or plug are defective.
Do not pass the cord around corners, over sharp edges or over hot objects and
keep it away from oil.
Do not use the power cord to carry or pull the machine.
Do not pull out the plug by yanking at the power cord or touch it with wet hands.
Do not let the power cord hang freely from tables or shelves.
Protecting others
Make sure that children are not allowed to play with the machine and/or with
packing materials.
Never direct the jet of hot water and/or steam towards yourself or others.
Do not touch the steam spout directly with your hands, always use the handles
or knobs provided.
Danger of burning
Avoid touching the steam spout and/or coffee/beverage brewing unit.
Space for use and maintenance
The machine must be installed by the service provider in accordance with the
safety regulations in force at the time of installation.
Only the service provider is authorised to move the machine.
Do not use the machine outdoors.
To prevent the casing from melting or being damaged, avoid bringing open fl ames
and/or very hot objects near the machine.
Do not use in places where the temperature may drop to a level equal to and/or
lower than 0°C; if the machine has been exposed to such conditions notify the
service provider, who will have to carry out a safety check.
Cleaning
Before cleaning the machine, it is indispensable to put the main switch OFF (0)
and remove the plug from the socket.
Then wait for the machine to cool down. Never immerse the machine in water!
It is strictly forbidden to tamper with the inside of the machine.
Do not spray water onto the machine to clean it. The machine and its compo-
nents must be cleaned and washed after the machine has not been used for
a certain period.
Storing the machine
If the machine is to remain out of use for a long time, switch it off and unplug it.
Store it in a dry place out of the reach of children.
Keep it protected from dust and dirt.