Operating Instructions; Dc Voltage Measurement - HT 3013 Manuel D'utilisation

5. OPERATING INSTRUCTIONS

5.1. DC VOLTAGE MEASUREMENT

The maximum input DC Voltage is 600Vrms. Do not measure voltages
exceeding the limits given in this manual. Exceeding these limits could
result in electrical shocks to the user and damage to the instrument.
Fig. 3: Use of the instrument for DC Voltage measurement
1. Select the position V
2. Insert the red cable into input terminal VHz%
terminal COM
3. Position the test leads in the desired points of the circuit to be measured (see Fig. 3).
The display shows the value of voltage.
4. If the symbol "O.L" is displayed, this indicates overload status
5. When symbol "-" appears on the instrument's display, it means that voltage has the
opposite direction with respect to the connection in Fig. 3
6. For use the HOLD, RANGE and MAX MIN functions, please refer to § 4.2.
CAUTION
EN – 8
and the black cable into input
HT3013