Monogram ZIK30GNNII Instructions D'installation page 10

3/4
If you choose to install custom panels, they must be cut
to the dimensions shown. The panels will attach to the
door and drawers using a hook and bracket system.
EXTREMELY IMPORTANT: Custom wood panels
hardware are attached. Refer to Templates for hook
and bracket location.
PANELS FOR SOLID DOOR
AND DRAWERS
29-3/4"
A
45-3/8
"
7-9/16
" B
22-3/4 C
"
If you choose to install custom panels, they must be cut
to the dimensions shown. The panels will attach to the
door and drawers using a hook and bracket system.
EXTREMELY IMPORTANT: Custom wood panels
hardware are attached. Refer to Templates for hook
and bracket location.
PANELS FOR SOLID DOOR
AND DRAWERS
29-3/4"
A
49-3/8"
7-9/16"
B
22-3/4"
C
Design Guide
PANELS FOR
GLASS DOOR
45-3/8"
Design Tip: Some amount of each panel will be visible on the interior side
of the unit. It is recommended that both sides of each panel be finished.
4
"
Design Tip: If using custom panels, a custom toe kick should
be considered. The Bottom of case is white.
PANELS FOR
GLASS DOOR
49-3/8"
4"
NOTE:
that are made of wood.
window. The opening may be smaller if desired.
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Drawer Panel: 9 lbs.
C Convertible Drawer Panel: 19 lbs.
33-3/8"
aluminum door frame.
NOTE:
that are made of wood.
window. The opening may be smaller if desired.
IMPORTANT NOTE: Maximum panel weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Drawer Panel: 9 lbs.
C Convertible Drawer Panel: 19 lbs.
33-3/8"
aluminum door frame.
Design Tip: Some amount of each panel will
be visible on the interior side of the unit. It is
recommended that both sides of each panel
be finished.
Design Tip: If using custom panels, a custom
toe kick should be considered. The Bottom of
case is white.
10
31-1000169 Rev. 1