Cleaning And Maintenance - CLAS AC 3010 Mode D'emploi

AC 3010
DUAL LASER/CAMERA HEADLIGHT ADJUSTER
REPLACEMENT OF LASER VISOR BATTERIES
Turn off the laser before opening the viewfi nder.
Unscrew the two screws on the laser viewfi nder cover and replace
the 3 x 1.5V AA mini-batteries, making sure to observe the polarity.
Close the viewfi nder and screw the cover back on.

CLEANING AND MAINTENANCE

The headlight tester should only be serviced by authorized technicians. Any other
work on the unit or any other modifi cation of it voids the warranty.
The unit does not require any special maintenance except normal cleaning with a damp cloth
(water or usual detergent).
CAUTION!
Do not use nitrogen thinners.
DISPOSAL
The device is mainly made of metal.
Other parts :
- Some parts are made of plastic.
- The packaging is made of cardboard and the documents are made of paper
- The device is painted with a scratch-resistant epoxy powder paint.
Please dispose of the device in accordance with local regulations.