CLAS AC 3010 Mode D'emploi page 29

AC 3010
DUAL LASER/CAMERA HEADLIGHT ADJUSTER
TEST PHASES
• Preparation :
LIGHT UP THE HEADLIGHT ADJUSTER with the button
ON/OFF located on the side of the device.
Wait a few seconds for the device to be checked and
initialized and the software to load.
•
OPTIONS MENU
Find all the information related to services and maintenance
•
APPLICATIONS MENU
Press the «APPLICATIONS» touch button to access the
various tests. The device can perform two types of TEST:
- OFFICIAL
- FREE
The OFFICIAL (offi cial) test is only activated if the headlight
adjuster unit is connected to a control computer with a
communication in DIR mode.
The FREE test is activated if there is no connection to a
control computer.
• Settings :
The «Settings» menu requires the following data:
•
Vehicle type:
- 2 headlights: «automobiles».
- 1 headlight: «motorcycle»
- 1 headlight, low beam only: « motorbike»
•
Type of headlight
- asymmetrical
- symmetrical
•
Type of light
- halogen
- xenon
•
Optical inclination
- please indicate the inclination written by the
manufacturer on the top of the headlight
(e. g. 1.2%) and adjust the value using
the + and - buttons.
•
Height of the headlight from the ground
- set the value with the + and - keys.