CLAS AC 3010 Mode D'emploi page 27

AC 3010
DUAL LASER/CAMERA HEADLIGHT ADJUSTER
• Work surface:
During the headlamp test, the working surface must be fl at.
If this is not the case, the headlamp must be placed on a
surface with a regular slope not exceeding 0.5%. Do not
test the headlights on uneven surfaces that are not level or
you may get incorrect measurements.
• Connections :
The right side of the optical chamber is equipped with a
button to turn the device on or off , an RS232 connection
for communication and a USB port for software update.
When the unit is switched on, if the symbol indicating that the BATTERY IS
DISCHARGED appears.
Please connect the supplied battery charger to the socket on the side of the
optical chamber and let the battery charge for at least 12 hours. You can perform the test
even when the battery charger is connected. Please note, however, that in this case, the
battery is not charged while the test is in progress.