CLAS AC 3010 Mode D'emploi page 20

AC 3010
DUAL LASER/CAMERA HEADLIGHT ADJUSTER
INTRODUCTION
The AC 3010 is designed to correctly align the light beam of all types of automotive
headlamps and more generally of any motor vehicle.
This device may only be used for this purpose. For this reason, we invite you to read this
manual carefully and to refer to it in case of any problems with its use.
If necessary, we remind you that our technical service is at your disposal if you need advice
on how to use it.
NOTE: The manufacturer may decide to modify the unit without notice to adapt it to
technological advances and specific production or installation needs. Therefore, even if the
illustrations used in this manual may differ slightly from the device in your possession, the
safety and operating instructions are guaranteed.
SPECIFICATIONS
Orientation :
- above and below :
- right and left :
Intensity :
Unit of intensity measurement
Unit of orientation measurement
Height from ground of optical center
Supply voltage with internal battery
Input voltage of battery charge
Working temperature
Width - Height - Lenght
Laser product classification
2 laser modules in the optical box
Visor laser module
Weight
0 - 600mm/10mt (0-6%)
0 - 1000mm/10mt (0-10%)
0 - 240 lx (Lux/25mt)
0 - 150 000 cd (Candle)
0 - 150 000 lx (Lux/lmt)
Lux (a25mt) - Kcand - Klux (a 1mt)
% - cm/10mt - degrees (°)
from 240 to 1450mm
12V
100 - 240V/50mt (0-60 Hz)
+ 5 °C - + 45°C
660 - 1780 - 695 mm
36kg
Class 3R laser product
Class 3R
Wave lenght is 635 nm
Power is 5 mW
Fan angle: 90°
Class 3R
Wave lenght is 635 nm
Power is 5 mW
Fan angle: 130°
LASER RADIATION
AVOID DIRECT EYE EXPOSURE.
CLASS 3R LASER PRODUCT