CLAS AC 3010 Mode D'emploi page 28

AC 3010
DUAL LASER/CAMERA HEADLIGHT ADJUSTER
• Vehicle positioning:
Place the headlight tester in front of the vehicle's right front
headlight about 20 cm away. Turn on the laser cross with the icon
••
displayed on the screen. Align the center of the cross with
••
the center of the bulb or the reference light of the beam.
Stop the laser with the same icon
• Alignment with the mirror viewfi nder:
Look for two points, on the front of the vehicle, that are perfectly symmetrical to each other (for
example, the top of the windshield or the headlights themselves) and turn the optical chamber until
the two reference points meet the black line painted on the mirror.
GOOD
• Alignment with the laser viewfi nder:
Look for two points, on the front of the vehicle, that are perfectly
symmetrical to each other (for example, the top of the windshield
or the headlights themselves) and turn on the laser using the
hard side switch, turn the optical chamber until the two reference
points meet the red line of the laser.
The use of controls, adjustments or instructions other than those specifi ed pres-
ents a risk of hazardous radiation exposure
••
on the screen.
••
NOT GOOD