V2 VEGA-24V Mode D'emploi page 63

Obstacle sensor adjustment
This menu allows to adjust the obstacle sensor sensitiveness. When the
power absorbed by the motor exceeds the set value, the control unit
detect an alarm.
For information about the sensor operation please refer to chapter 15
Slow down in opening
This menu allows regulating the percentage of the ride/drive that is
carried out at reduced speed during the last opening stretch.
Slow Down in Closing
This menu allows regulating the percentage of the ride/drive that is
carried out at reduced speed during the last closing stretch.
Start command during the opening phase
This menu allows fixing the control unit conduct in case it receives a
Start command during the opening phase.
PAUS The door stops and goes to pause
ChiU The door immediately starts closing
no The door go on with the opening phase (command is ignored)
Select option PAUS, to set up the "step-by-step" operation logic.
Select option 'no', to set up the 'always open' operation logic.
61