Special Functions; Hiding Measurement Values - Microlife WatchBP Office Mode D'emploi

Special Functions

Hiding measurement values

The WatchBP Office device features a "Hide" function
in order to prevent unnecessary elevated blood
pressure in patients due to nervousness triggered by
visible blood pressure measurements.
This feature is only available in follow up mode
*
When the «Hide»
*
function is ON, the
countdown between
each measurement and
the Hide icon will be
displayed.
Please make sure the
*
Bluetooth switch is in OFF
position, otherwise the
«Hide» function can not
be set.
21
1) Activate the «Hide» Function – pressing and
holding the M Button for 7 seconds.
2) Select ON or OFF – Press the M Button again to
turn the "Hide" function ON or OFF.
3) Confirm – Press Start/Stop to confirm the setting.
The «1st VISIT» Mode "Hide" default setting is set to ON
*
and cannot be set to OFF.
Press and hold
for 7 seconds...