Conel FLOWSAN Instructions D'installation Et D'utilisation page 33

Functional description of level controls
Level sensor (bottom)
"C" STOP
Level sensor (centre)
"B" START
Level sensor (top)
"A" ALARM
Level sensor "A" (top)
Level sensor "B" (centre)
Level sensor "C" (bottom) Goes down
Connectable level sensors
Accessories
FLOW Level Control Kit Float Switches:
three float switches with coupling,
stainless steel holder, adjustment
weights, fixing material.
FLOW Level Control Kit Broken Finger:
three broken finger floats with coupling,
stainless steel holder, fixing material.
NOTE!
For replacement or repair; individual, separately available float switches with coupling KBN
FLOWASS10, or broken finger float switches with coupling KBN FLOWAKS10, from our FLOW
ALARM SYSTEM program.
A
"A" ALARM
B
"B" START
C
"C" STOP
Rises high No function, pump ready/dry run protection
Important note:
Level sensor "C" must be set high so that level sensor "B"
can be automatically enabled to start the pump.
Rises high Pump 1 switches on
Note:
Redundant operation interchanging with the switch-on
sequence.
Rises high High water alarm is triggered
Goes down High water alarm is switched off
Goes down No function
Turns off the pump(s)
KBN
FLOWNSS10
FLOWNKS10
33