Roger Beep; Key Beep; Room Monitor - Albrecht Tectalk Action Pro Mode D'emploi

6) Roger Beep

The Roger Beep is a short tone that is automatically added to the end of your
transmissions to tell other users that you have finished speaking. You can activate
or deactivate the Roger Beep as required.
To change the Roger Beep setting, press the MODE button until
Use the UP or DOWN button to change the setting.
Press the PTT or MODE button or wait for 5 seconds to store your choice. The
Roger Beep icon will appear when the Roger Beep is active.

7) Key Beep

If the Key Beep is activated, your radio will emit a confirmation tone whenever you
use the keypad. You can activate or deactivate the Key Beep as required.
To change the Key Beep setting, press the MODE button until
the UP or DOWN button to change the setting. Press the PTT or MODE button or
wait for 5 seconds to store your choice. The Key Beep icon will appear when Key
Beep is active.

8) Room Monitor

The Room Monitor is similar to Hands Free (VOX) mode, but it ignores short, brief
noises and uses only the highest microphone sensitivity level. When Room
Monitor mode is activated, the radio will transmit for 15 seconds when it detects a
continuous noise for 5 seconds or more. If the noise persists the radio will
transmit for another 15 seconds.
To activate the Room Monitor mode, press the MODE button until
Use the UP or DOWN button to change the setting. Press the PTT or MODE
button or wait for 5 seconds to store your choice and activate the Room Monitor.
The Room Monitor icon will appear when the Room Monitor is active. Note: The
Room Monitor function is not a replacement for regularly checking the safety and
security of children. If you move out of communication range you will not hear
transmissions.
appears.
appears. Use
appears.
15