Battery Warning; Power Save; Troubleshooting - Albrecht Tectalk Action Pro Mode D'emploi

19) Battery Warning

The Battery Level Indicator will blink when the battery level is low and the battery
needs recharging. If necessary, refer to the instructions to recharge the battery.
Operating the radio with a low battery will reduce performance.

20) Power Save

To conserve battery power the radio will automatically enter the Power Save
mode after a short period of inactivity. There is no user setting for Power Save.

11. Troubleshooting

If you experience problems with your Tectalk Action Pro first check the battery
power level as low batteries can cause problems such as no transmission, weak
reception and poor sound quality. Check the manual and radio display to ensure
that a function (such as VOX) has not been activated by accident.
If this does not solve the problem reset your unit as follows:
1) Switch off the radio.
2) Press and hold the Up button and PTT button together.
3) Switch on the radio.
This will reset the radio to the factory settings and should fix most problems.
19